3D models.
Printable parts, designed in code.
Every model here is a Python script on the build123d CAD library, so each one is an exact solid: STEP for CAD, STL and 3MF laid out for printing. All of them print without supports on a Bambu Lab H2C, in PLA or PETG.
Collections
print-testedBridge hook 1U
Clamps the steel bridge between two slots in line. The hook today's arc drawers hang on.
print-testedSlot hook 1U
Fills a single slot and snaps over its bottom rim, so an object can sit within one cell.
print-testedSlot hook 2U
Slot hook 1U carried down into the next slot in line: one hook held in two slots, steadier against tipping out.
designArc drawer 2×2×65
Two cells wide, two rows tall, 65 mm deep, on a single hook column.
designArc drawer 3×2×65
Three cells wide, two rows tall, 65 mm deep.
designArc drawer 3×3×65
Three cells wide, three rows tall, 65 mm deep. The tallest drawer.
designArc drawer 4×2×65
Four cells wide, two rows tall, 65 mm deep.
designArc drawer 5×2×65
Five cells wide, two rows tall, 65 mm deep. The widest drawer.
designArc drawer 3×2×90
Three cells wide, two rows tall, 90 mm deep. The deepest drawer.
designCove tray 3×1
A flat floor with every wall curving into it, for scooping parts out with a finger.
designRamp tray 3×1
The floor tilts down toward the wall, so parts gather at the back and stay put.
designRamp tray 6×1
The Ramp six cells wide, with a gentler slope and a lower lip.
designLift-out dish 3×1
A low cradle on the hooks and a coved dish that lifts out to carry parts to the bench.
designPencil cup 2×2
A compact cup with a honeycomb grid for pencils, markers and picks.
designTool caddy 3×2
Holes sized for the tools, from markers at the back to a slot for tweezers at the front.
designTall bin 3×3
A taller back for long tools; the sides fall to the front in one S-curve.
designTall bin 3×4
The tall bin one row taller, for long tools.
designSplit bin 4×2
A wall down the middle, a grid on the left and an open well on the right.
designLean bin 3×3
The front leans out at 42°, so screwdrivers and pencils lie back on it and lean toward you.
designLean bin 4×4, screwdrivers
A taller, wider lean bin with a screwdriver grid that holds 8 drivers fanned out, handles clear of each other.
designWire stripper holder
Two prongs under the grips of a Haisstronica 3-in-1 wire stripper, with the head hanging between them.
designCaliper holder (Neiko 6")
A fork that a Neiko 6" digital caliper hangs from, jaws up, with the beam down the wall.
ready to printFront label
A white plate with black text inlaid flush, for the bins' label pocket and the U holder on the arc drawers' face.
ready to printChin-speaker desk stand
A 45° desk stand with the speaker in the chin under the screen, firing up and forward through a slotted grille. The best sounding of the three.
ready to printCompact ducted desk stand
A smaller 45° desk stand: the speaker stands at the back and a printed duct carries its sound forward to a slot grille in the front lip.
designNightstand stand
A bedside stand: the screen sits in a slim case on a toothed hinge, upright or leaned back up to 30°, over a short tower with the speaker facing up.
No models match.